RX-HDX SSID discovery

WiFi SSID discovery

To perform WifFi discovery on the RX-HDX press Ctrl+Alt+W. 

You will be presented with the SSID's for the available networks.
    • Related Articles

    • How to configure WiFi interface on RX-RDP and RX300?

      You can change the Network connection settings of an RX unit by first going to the firmware of the device and click on the gear icon on the top right of the home screen.   From there, please click on the Network tab, and click on Wifi.  That will ...
    • How to configure WiFi interface on RX-RDP and RX300?

      You can change the Network connection settings of an RX unit by first going to the firmware of the device and click on the gear icon on the top right of the home screen.   From there, please click on the Network tab, and click on Wifi.  That will ...
    • Disable WIFI

      Following steps can be performed to Disable Wifi on device boot. From RX-HDX Device: Open RX-HDX Device Configuration Click on "All" under "Management". Click on "Eventscripts" Under "Startup 1 - before network initialization" enter iwconfig wlan0 ...
    • RX-HDX Factory Reset

      This article is for administrators needing to reset an RX-HDX device with a manual process because it has somehow locked or stopped responding to the management tools. Introduction to Factory Rest (FW 2.40.2144+) Important - Do not use a KVM or ...
    • RX300 Support for External WiFi Adapters

      Product Line: Following WiFi adapters have been tested and confirmed to work with RX300: Adapters based on Realtek 8192CU, 8192EU, 8188CUS chipsets. Sony UWA-BR100 802.11abgn Wireless Adapter (Atheros AR7010+AR9280).   Other WiFi adapters are likely ...