VMC and NTC in the same environment

VMC and NTC in the same environment (N-Series and RX-HDX)

Customers wondering if both vSpace Management Center and NoTouch Center can be present in the same environment

Customers who wish to have VMC and NTC in the same environment can do so as the discovery of the management appliance is completely different in architecture.
VMC discovery is via DHCP tags or MDNS
NTC discovery is done via DNS by setting a DNS "A" record for tcmgr. NTC and RX-HDX devices will automatically search or broadcast hostname of tcmgr. So, if the devices are on the same network, they should auto discover, if not on the same subnet. The DNS record will provide the correct information -  http://rx-hdx.ncomputing.com/kb/Tcmgr

    • Related Articles

    • How do I get support for my N-Series device?

      The N-Series product family includes the 400, 500, 500W, and 600. The N-Series 400 has reached its “End of Support” date and is therefore limited to self-help via our KB articles in this portal. The 500, 500W, and 600 will reach end of support ...

    • Configuration and settings for Dual Display with RX-HDX

      Here is a link to the Wiki page for configuring Dual Display with NComputing and SDA  The below is additional reference information Configuring the RX-HDX to support the Secondary Display adapter is relatively simple. Below are the necessary steps. ...

    • VMC Search results are Truncated (RESOLVED)

      Issue: Using  VMC 3.7.17.476 witn N-Series 2.4.2.1. When performing a device search for devices such as Retail the search results may not display all devices that meet the search criteria Solution: This problem has been addressed in VMC 3.7.20 Please ...

    • Getting started with RX-HDX and get latest firmware updates

      IMPORTANT NOTE: As of July 1, 2020, NComputing has formed a new partnership with Stratodesk, making the official Stratodesk branded OS and management center available on NComputing devices. Enterprises and organizations using NComputing thin client ...

    • Can RX300/RX-RDP/RX-HDX work with PoE?

      There is a way to make RX300(or RX-RDP, RX-HDX) works with Power over Ethernet. Active PoE Splitter available from Amazon which is much cheaper and easier than Raspberry Pi PoE Hat circuit.  For example, below is the picture of typical Active PoE ...