Smart card readers

            Smart card readers

            Functional redirection of smart card readers

            Functional redirection of smart card readers requires enabling the smart card reader support on the RX-HDX client side. The Linux components responsible for this support are the PC/SC daemon and the PC/SC driver for the smart card reader. NoTouch OS contains the driver for CCID-compliant smart card readers, as well as few additional dedicated smart card reader drivers (ACS, OmniKey). You can check whether your smart card reader is supported by the CCID driver by visiting following web pages: https://ccid.apdu.fr/ccid/supported.html, https://ccid.apdu.fr/ccid/shouldwork.html.

            To enable functional redirection of smart card readers configure following system-wide NoTouch settings:


            NoTouch setting location

            NoTouch setting name

            NoTouch setting value

            Services > Smartcard

            Smartcard service (PCSC)

            On

            Services > Smartcard

            Device driver for smartcard

            Try ‘All’ or ‘CCID’ first of all. For ACS or OmniKey readers select the dedicated driver.




            Under Services, Set "Start Citrix USB forwarder" to off




            And in the 


            Note: RX-HDX device must be rebooted for the above changes to take effect.

            There are no Citrix Policy settings for controlling the redirection of smart card readers and smart cards.

            Generic USB redirection of smart card readers

            Generic USB redirection of smart card readers is not possible.

            Updated: 02 Jul 2019 01:01 AM
            Helpful?  
            Help us to make this article better
            0 1