RX300 Factory Reset

RX300 Factory Reset

1. Process under newer firmware builds. (3.10.3 and newer)

In recent versions of the RX300 firmware you can find the Factory Settings button in the RX300 firmware menu:
A. Click on the settings (gear) icon.
B. Click on the Support tab 
C. Click on Factory Reset



Once the terminal executes this and returns to the home screen, then, the process is completed. 

2. Process with older firmware or if you have not access to the firmware settings. 

To factory reset the RX300, turn on the device and wait for the connection screen to appear.



Press together CNTL+ (Windows Key) + F12 to bring up the Terminal Console. This is the command window that shows on the top left in the picture below. 



In the Terminal Console type: reset-to-factory
Then, press Enter on your keyboard.


Once the terminal executes this and returns to the home screen, then, the process is completed. 

Feel free to contact technical support if you need further assistance. 

    • Related Articles

    • RX-HDX Factory Reset

      This article is for administrators needing to reset an RX-HDX device with a manual process because it has somehow locked or stopped responding to the management tools. Introduction to Factory Rest (FW 2.40.2144+) Important - Do not use a KVM or ...

    • Factory Reset RX-HDX device using Remote Browser Login

      Factory Reset RX-HDX device using Remote Browser Login If you are unable to access the local configuration (e.g. because the screen stays blank or device fails to boot up) but the device has network then you can follow below mentioned steps to ...

    • L Series: Password and Factory Reset

      "Classic Versions" like vSpace 6 have no more support and will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not supported or ...

    • M300 Reset to Factory Settings.

      The Large M300 Client includes a recessed reset button that can be used in the event that the client will not reset through normal means (Via vSpace Console). This button is located on the back of the Large Client next to the DC power port and can be ...

    • N-Series Factory reset

      To perform a "Factory Reset" on your N Series device, please follow the instructions below 1. Boot the device and watch for the NComputing logo   2. As soon as the NComputing logo appears, press and HOLD the "R" key on your keyboard. Note that timing ...