NoTouch default ports

NoTouch Center Virtual Appliance Service Ports \ Firewall

You can view and manage the default ports for NoTouch center by accessing the firewall configuration panel

https://MYApplianceIP/va-admin/fwconfig.php
example https://192.168.1.1/va-admin/fwconfig.php

The default port settings are 

Policy
Service
Protocol
Ports
Change...
Description
allow
Ping (Echo)
TCP
-
Deny
Respond to ping
allow
Secure Shell (SSH)
TCP
22
Deny
System administration / access to the Linux shell prompt
allow
Samba (File sharing)
TCP
137, 138, 139, 445
Deny
Connect to file shares from Windows and Mac systems
allow
Web/HTTP
TCP
80
Deny
HTTP Web access (unencrypted) for client machines and sysadmins
allow
Web/HTTPS
TCP
443
Deny
Encrypted HTTPS Web access for client machines and sysadmins
deny
Legacy Center/HTTP
TCP
8080
Allow
Formerly used NoTouch Center HTTP access for clients and sysadmins
deny
Legacy Center/HTTPS
TCP
8443
Allow
Formerly used NoTouch Center encrypted HTTPS access for clients and sysadmins
allow
ZeroConf
TCP/UDP
5353
Deny
One way of client devices finding this VA automatically
allow
TFTP
TCP/UDP
69
Deny
Required for PXE boot
allow
Network Block Device
TCP
2001-2012
Deny
Required for PXE's 'Network Block Device' method

    • Related Articles

    • NoTouch Center Appliance Install on a HyperV VM

      This article is for anyone wanting to install the NComputing NoTouch Center Appliance specifically on Microsoft HyperV 2016 Currently there are not screen shots but I will make sure and be descriptive and will reference relevant links mentioned.  ...
    • NTC Firewall Configuration

      Firewall configuration The Stratodesk Virtual Appliance comes with a host firewall similar to any other contemporary server system. It is based on Linux' iptables mechanism and will filter inbound packets and allow only packets to selected services ...
    • Getting started with RX-HDX and get latest firmware updates

      IMPORTANT NOTE: As of July 1, 2020, NComputing has formed a new partnership with Stratodesk, making the official Stratodesk branded OS and management center available on NComputing devices. Enterprises and organizations using NComputing thin client ...
    • RX-HDX, RX420(HDX), EX400 and NoTouch Center User Guide

      Comprehensive RX-HDX, RX420(HDX), EX400 and NoTouch Center user configuration guide can be found online: http://rx-hdx.ncomputing.com/kb/Main_Page Don't forget to use the keyword search feature located at the upper right-hand side of the above page:
    • Register RX-HDX, RX420(HDX) and EX400 devices and extend the hardware warranty

      There are multiple ways to register these RX-HDX, RX-HDX+ and RX420(HDX) devices to your NComputing Management Portal account. Once the devices are registered, you will be able to apply extended hardware warranty licenses you purchased to these ...