Knowledge Base NComputing Verde VDI Networking

            Implementing BRIDGE on VERDE (RPM) - Non-BareMetal

            Product Line:  VERDE

            Enabling BRIDGE in VERDE (RPM) is profoundly different from VERDEOS.  Perform the following:

            Your network environment must have a dhcp server.  Determine the name of your NIC VERDE is running on?  As you can see in the screen shot, mine is eth0. 

            I put that information “eth0” into the MC/Configuration/General Settings/General Settings/Bridge Interface(s) field as follows:

            Once you save this, ensure all the sessions are shutdown and do a:    /usr/lib/verde/bin/rc.verde stop

                                                                                                                                              /usr/lib/verde/bin/rc.verde start


            If you have a multi-server cluster, on all the servers that are NOT the CM, do a service VERDE stop (/usr/lib/verde/bin/rc.verde stop).  Once the CM is back up (you can access the MC), do a server VERDE start (/usr/lib/verde/bin/rc.verde start) on all the other servers.  Once VERDE comes back up, you’ll see a change in your ifconfig.  You’ll see  eth0  as well as eth0-- .  This is the BRDIGE NIC.

            Updated: 06 Jun 2019 07:51 AM
            Help us to make this article better
            0 0