How to Team Two NICs Together on the VERDE Server/NIC Bonding
Product Line: VERDE
VERDE version: 6.6 SP2/7.0
Host/Server: VERDEOS
Guest/Image: N/A
Client/Workstation: N/A
Often, there is a call to bond two NICs on the VERDE Server. This can be performed within the VERDEOS Menu.
After configuring a single network interface, configuration the other NICs as "slaves" to the first network bridge.
From the Network Configuration part of the VERDE-Menu, Select 2-Configure Networks.
If your NETWORK0 has already been configured and you have another NIC, you can select option 3 (this is usually eth1)
and then Option 4 - Slave for Bonded Network in the Nic Usage menu should be available for you.
The LACP (802.3ad) protocol MUST be loaded on the switch so the ports do NOT shut down.
VERDE supports Bond Modes 1 and 4.
Related Articles
VERDE VDI Network Terms - Networking with Dual-NICs
Product Line: VERDE Preface: The information contained within this document refers to the networking aspects of the VERDE VDI software solution being installed via a set of RPMs (program modules) on top of CentOS7. The following networking ...Install VERDE (rpm) on Centos 7 with NIC Teaming
Product Line: VERDE NIC Teaming is a very nice networking feature that lets us use more than one adapter in a paired mode (team) for better speed and more redundancy. Here are instructions for TEAMING two NICs while installing Centos7 with VERDE. ...Verde VDI Network Terms and Descriptions - NIC Bonding
Product Line: VERDE Introduction: The information contained within this document refers to the networking aspects of the VERDE VDI software solution being installed via a set of RPMs (program modules) on top of CentOS7. The following ...Active-Backup Bonding Cannot be set
Product Line: VERDE VERDE version: 7 Host/Server: VERDEOS Guest/Image:N/A Client/Workstation: N/A ISSUE: If you are trying to configure bonding on the NICs, every time the Option 1 is selected (active-backup) and the ENTER button is pushed, ...Required NIC Interface Naming Convention
Product Line: VERDE Specific to VERDE (rpm's), the Network Interface must be named the same across all VERDE servers. Installing with VERDE rpm's, CENTOS 7.x takes liberties and renames the NIC. Here are instructions on how to configure the name ...