Error: "Input Not Supported"

Error: "Input Not Supported"

The error is likely coming form your monitor, since it does not support the resolution it is given.

Please check what is the accepted resolution for your monitor and change the resolution on your NComputing access device.
    • Related Articles

    • Enabling Dual Monitor Display on RX300 (VGA and DVI versions)

      How to enable the Dual Display on the RX300 PDF available here as well PRE INSTALLATION REQUIREMENTS 1. You will need an NComputing Secondary Display Adapter Kit (SDA) There are different versions of these adapters and you will need to ensure that ...
    • RX420 Common Error with HDX’s display issue. Black screen or no detection on the monitor

      If you are experiencing a black screen when plugging in the device to a monitor and it shows no signal from the HDMI input, please read on:    The MicroHDMI port in the RX420(HDX), due to mechanical specifications, requires that a MicroHDMI connector ...
    • L300: Mouse or input device is behaving erratically.

      If an input device you use with your L Series device shows erratic patterns, seems to work intermittently, or doesn't work at all, there are a few tips that may help. 1. Sometimes, USB devices coming from different vendors, may use components that ...
    • VERDE User Side Error Codes

      Product Line:  VERDE If we talk about the VERDE VDI client mode then we need to distinguish between two types of communication: User authentication and enumeration of VERDE VDI desktops. Terminal connections to VERDE VDI desktops.   The RX-series GUI ...
    • How to configure Display Properties on an RX300 and RXRDP devices.

      You can change the Network connection settings of an RX unit by first going to the firmware of the device and click on the gear icon on the top right of the home screen. From there, go to the Display Tab and you will be able to configure any desired ...