Automatic PMC server discovery (management server)

Automatic PMC server discovery (management server)

Automatic registration of RX-RDP devices with the PMC management server can be obtained by adding a DHCP scope tag of 207

If you add DHCP scope tag 207 equivalent to your PMC server hostname or IP address you RX-RDP devices will automatically register to your PMC server

    • Related Articles

    • Automatic Assignment

      Introduction: What is Automatic Assignment (Auto-Assign)? Auto-Assign means that new clients will be placed into a specific group and getting this group's configuration immediately, rather than being placed into the default "Unassigned" group without ...

    • PMC 3.0, Start Guide

      Overview This document is an extraction from the release notes of PMC 3.1.2. It covers everything you need to know, in-depth, regarding installation and deployment of PMC. It is always recommended that you use the current release notes of every PMC ...

    • PMC: "The NComputing Management portal is unavailable" during activation.

      Problem:   While registering PMC with the Management Portal, you see a warning: "The NComputing Management Portal is Unavailable";  Solution #1: (Registration instance already exists in the management portal): In this case a scenario, perhaps, you ...

    • What is PMC?

      OverviewNComputing PMC is an endpoint management system designed and developed to remotely manage NComputing access devices including LEAF OS devices (PCs/Laptops), RX420(RDP), RX-RDP+, RX-RDP and RX-300 thin clients.   PMC is provided as a virtual ...

    • Configuring N-Series devices with custom DHCP scope options

      NComputing recommends using the most current version of vSpace Management Center for N-Series device management, however, there may be a need to configure some settings on an N-Series device via DHCP scope options. Specifically the Tag (171) for ...