L300 Firmware

Update L Series Firmware in vSpace Pro

Update via vSpace console

  1. Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet.  Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass through.  We have KB articles and the L300 / L350 user's manual that will cover this in depth.   
  2. On the vSpace host system, launch the NComputing Console by navigating to: Start > All Programs > NComputing vSpace Console. Click on Manage devices.
  3. Click on the “Firmware Update” button on the top of the window.
  4. Select “Latest from LAN” device and click “Update
  5. The terminal will go through it's firmware update cycle.  
  6. Your firmware update is now complete. Please refer to the latest user manual for further information on other approaches to updating firmware.

Update via thin client device firmware menu

  1. Turn on the device. 
  2. Click on Device Setup
  3. Click on the Update Tab
  4. On the Manual Update section, click on Update Now.
  5. Let the device go through the update cycle.  
  6. Your firmware update is now complete. Please refer to the latest user manual for further information on other approaches to updating firmware.



If you need to update your L300 via FTP, we have an article here on how to do it. 

Do not interrupt the firmware update cycle as this may damage your device permanently.  Damage to the device due to firmare update interruption may not be covered in the device's warranty.  

Article: 1010


REV 12/17
    • Related Articles

    • Update L300 Firmware (Classic vSpace 6)

      "Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...
    • How to use 'Scheduled Tasks' feature in vSpace Console for scheduled reboot, shutdown or firmware update

      vSpace Pro Enterprise Edition (version 12.5.1 and higher) comes with vSpace Console ‘Task Schedule’ support for scheduled device reboot, shutdown and firmware update. Below please find the instructions for each supported ‘Task Schedule’ use case: (1) ...
    • vSpace Pro Installation - Tips, References and Process Detail

      Published The following article is a detailed process and tips for installing our vSpace Pro platform (vSpace Pro LTS, vSpace Pro Enterprise Edition). As an additional supplement, this article will deal with all other aspects of Pre-Deployment and ...
    • NComputing Deployment Checklist for L, M, MX, RX Series thin clients and Client Pro

      Summary This document is intended to provide a detailed overview of the three main stages of a deployment with vSpace: We will cover in this document the following: 1. Pre-deployment 2. Host Deployment and Tuning Below you'll find a consolidated list ...
    • vSpace Pro Broadcasting

      Broadcasting: Broadcasting provides screen sharing functionality, allowing one screen to be broadcast to others. This allows an instructor to broadcast their screen or students screen, to everyone else. Great for presentations, sharing local or web ...