Enabling SSH and
providing NComputing remote access to an N-Series Device.
On occasion NComputing requires access to the root level of
the N-Series, to facilitate this, a couple things must be done:
1.
SSH must be enabled on the N-Series devices
a.
Open the device settings and navigate to the
Security Tab
b.
Click on the SSH tab:
c.
And the check the “SSH enabled” box
2.
Either give the N-Series device an external IP
address or enable port-forwarding on your router via port 22 to the internal IP
address of the N-Series device.
3.
Once you have either provided the N-Series device
either an external IP address or set up port-forwarding, please provide
NComputing the IP address for remote connection.
Once the NComputing has completed the required task or logging,
you will be notified, you can then turn off the port-forwarding or move the N-Series
device back to an internal IP address.
Article: 1020
Related Articles
How to configure router 'port forwarding rule' to remotely access my vSpace Pro server in the office from home, with L-series, RX300 or LEAF OS devices?
Customers who deploy vSpace Pro servers can access their user sessions remotely via the router port forwarding method. However, this approach can result in security vulnerabilities (port 27605 forwarding) and should be the last option if the customer ...
How to configure router 'port forwarding rule' to remotely access my RDSH server in the office from home, with RX-RDP, RX420(RDP) or RX300 thin client?
Customers who deploy RDSH servers can access their user sessions remotely via the router port forwarding method. However, this approach can result in security vulnerabilities (port 3389 forwarding) and should be the last option if the customer does ...
How do I get support for my N-Series device?
The N-Series product family includes the 400, 500, 500W, and 600. The N-Series 400 has reached its “End of Support” date and is therefore limited to self-help via our KB articles in this portal. The 500, 500W, and 600 will reach end of support ...
L Series. Error: IP Conflict Detected
If you are using terminals that are not compatible with vSpace Pro 11 or Enterprise edition, likely, these are outdated and need to be upgraded. You can see our new line of products and consult your sales representative or authorized partner about ...
Firmware update availability for N-series devices
N-series devices (N400, N500, N500w, N600) will reach End-of-Life on the following schedule: N400: December 30, 2019. N500: December 31, 2020 N500w: December 31, 2020 N600: December 31, 2020 Firmware for these devices are no longer in development. ...