Storage
VERDE - Remote Access Sizing Spreadsheet
Product Line: VERDE VERDE users and customers are familiar with VDI Sizing Spreadsheet. It has become apparent that one is needed specific to the Remote Access function. You'll find attached to this Knowledge Base Article the aforementioned ...
Configuring CIFS for VERDEOS
Product Line: VERDE Following are instructions to assist in setting up Common Internet File System (CIFS) to be used as Shared Storage by VERDEOS. · Create a CIFS share on the Windows Server and make sure it is accessible from another host ...
VERDE NFS 3 as Opposed to NFS4 As of 8.2.7 and Before
Product Line: VERDE As of the writing of the Knowledge Base Article, NFS4 has not been tested. A customer installed their Clustered VERDEOS 8.2.7 on NAS/NFS 4. VERDEOS installed, but, when they attempted to create a gold image or access an ...
VERDE Clustered Deployment Using Microsoft Azure File Shares
Product Line: VERDE A VERDE clustered deployment (2 or more servers) requires shared storage available to all servers in the cluster. When deploying a VERDE cluster to Microsoft Azure the File Shares feature provides the required shared storage. ...
VERDE/VERDEOS CIFS Mount Instructions
Product Line: VERDE To get CIFS storage working with RPM based installation on CentOS 7.x, use the following steps: Install CentOS 7.x Install VERDE using RPM build packages Installed CIFS-UTILS using command yum install cifs-utils Stop VERDE ...
How to get IP-Redirection to work when the Cluster Master is Completely Dead.... DNS or Gateway
Product Line: VERDE When a "normal" failover occurs, the IP naturally redirects to the new Cluster Master (Candidate). This occurs on the Management Console, VERDE-Client and RX-300. If the failover occurs due to a completely dead Cluster Master ...
When Testing Network, it Fails on CIFS Mount
Product Line: VERDE If you're attempting to mount CIFS/Windows storage device for VERDE's clustered environment, you MUST get “a route” established between the Cluster Master and the CIFS storage server before the mount is successful. What you ...
VERDEOS NAS Mount Instructions:
Product Line: VERDE It is recommended that you set up your shared storage mount before installing and using VERDEOS. But, it is possible to add the storage device post usage. You'll need to backup all the data located in /home/. /HOME/vb-verde is ...
CIFS /etc/fstab Mount Command
Product Line: VERDE *NOTE* CIFS is Supported. Here's an example of the CIFS mount command in the /etc/fstab file: //192.168.0.152/verdeshare/verdeshare /home/vb-verde cifs username=administrator,passwd=Ahlborn09,domain=ahlborn.local 0 0 ***NOTE*** ...
How To Partition and Format Storage Devices in Linux
Product Line: VERDE Introduction Preparing a new disk for use on a Linux system can be quick and easy. There are many tools, filesystem formats, and partitioning schemes that may complicate the process if you have specialized needs, but if you ...
External/Shared Storage - Minimal Requirements
Product Line: VERDE The shared storage is a key component of a VERDE cluster, the overall performance of the system will depend on its ability to deliver the required output. For this reason home built NFS servers are not supported as a viable ...
Folder Redirection - Changing the Windows "Documents" to a Network Drive
Product Line: VERDE ISSUE: VERDE offers built-in document redirection functionality in the virtual desktop (guest), by default the Windows "Document" folder will automatically be redirected to the virtual desktop D: drive. Some customers may need ...
Network Storage Troubleshooting - How To Test the Transfer Speed
Product Line: VERDE ISSUE: In a cluster environment, all VERDE servers (nodes) are sharing the same storage. If not sized properly (IOPS, bandwidth) the storage device can quickly become a bottleneck for the entire system and induce performance ...
Create a Trace Log for Debugging
Product Line: VERDE Issue: To create a trace log use the Linux "strace" command to trace system calls and signals. When more information is needed to investigate an issue, create a "strace" log as follows? In Ubunu and SLES Linux Environment: ...
When Testing Network, it Fails on NFS Mount
Product Line: VERDE ISSUE: When mounting storage via the VERDE-MENU, and then running the Test Network, the test fails on NFS Mount... FAILURE writing test file (/home/vb-verde/verde-network-test.txt) to external But, when you test manually ...