Audio & Display
How to configure USB audio for RX-HDX, RX-HDX+, RX420(HDX) and RX420(STDK) with Stratodesk NoTouch OS firmware version 3.2.760 and higher?
NoTouch OS configuration change is need to enhance USB audio quality: To optimize USB audio quality for Stratodesk NoTouch OS firmware version 3.2.760 and higher: Go to the RX-HDX, RX-HDX+, RX420(HDX) and RX420(STDK) configuration setting -> Audio -> ...
How to configure 3.5mm audio output for RX-HDX, RX-HDX+, RX420(HDX) and RX420(STDK) with Stratodesk NoTouch OS firmware version 3.2.398, 3.2.498 and higher versions?
In Stratodesk NoTouch OS firmware version 3.2.398, 3.2.498 and higher versions, special audio configuration setting is required to provide audio output to the built-in 3.5mm jack on RX-HDX, RX-HDX+, RX420(HDX) and RX420(STDK). Below please find the ...
RX-HDX Audio settings
USB \ Analog Audio with firmware versions 2.40.3512 and newer. RX-HDX default setting optimizes the USB audio quality and performance. This may have a negative effect on analog audio. The following audio setting applies to RX-HDX firmware versions ...
Citrix HDX RealTime Media Engine on RX-HDX - Skype for Business
•The Citrix HDX RealTime Media Engine (RTME) is the client-side component of the Citrix HDX RealTime Optimization Pack for Skype for Business RX-HDX FW 2.40.2658 includes Citrix Receiver 13.8 and RTME version 2.4.0-1233 RTME component Single Display ...
Configuration and settings for Dual Display with RX-HDX
Here is a link to the Wiki page for configuring Dual Display with NComputing and SDA The below is additional reference information Configuring the RX-HDX to support the Secondary Display adapter is relatively simple. Below are the necessary steps. ...
RX-HDX - HDMI to VGA adapter
RX-HDX- HDMI to VGA adapter Can I use an HDMI to VGA adapter with the RX-HDX? Yes You can use commercially available adapters for HDMI to VGA, but they must be "active" adapters. As HDMI is digital, and VGA is analog, the adapter must have passive ...