Which USB peripheral devices are supported by the L400?

Which USB peripheral devices are supported by the L400?

In addition to standard keyboard and mouse, the L400 provides extensive USB peripheral support, including:
  1. Mass storage
  2. Printers
  3. Smart card readers
  4. Headsets or speakers
  5. Webcams
  6. USB hubs
  7. Signature pads
  8. COM ports
Addition peripheral support may be added in the future. 

    • Related Articles

    • Smart Card Reader Support in vSpace Pro

      Scope / Overview This article provides details on the enhanced smart card reader support available in vSpace Pro version 11.2.0 and later. It covers supported devices, setup instructions, and configuration settings for optimal performance. ...

    • What are the default USB peripherals settings in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?

      Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Peripherals section of the RX-RDP Setup GUI allows ...

    • USB third party devices

      Scope  This Article is for users looking for 3rd party, USB device compatibility for current L-Series, MX Series and M-Series NComputing devices. General advice Update the vSpace platform.   The general rule when you are using a third party device ...

    • RX300 / RX-RDP USB Peripheral device redirection recommendations.

      Please refer the KB article on How to configure USB peripheral device redirection policy for RX300 and RX-RDP: https://support.ncomputing.com/portal/kb/articles/how-to-configure-usb-peripheral-device-redirection-policy-for-rx300-and-rx-rdp In ...

    • L Series: L-230, L-130 and Legacy Devices. About USB Device Support

      If you are using terminals that are not compatible with vSpace Pro 11 or Enterprise edition, likely, these are outdated and need to be upgraded.   You can see our new line of products and consult your sales representative or authorized partner about ...