vSpace Client user manual

vSpace Client user manual


vSpace Client is a retired product. "Classic Versions" like vSpace 6 have no more support and will be permanently discontinued after June 30th, 2020 and will no longer be able to be registered.  Please upgrade promptly to our latest platform  vSpace Pro. and use the successor to vSpace Client, which is vSpace Pro Client.

If you need technical support to guide you on your upgrade, you can contact us  here. 

Link to the vSpace Client user manual.

Article #KB113
Last Edited: June 9, 2020

    • Related Articles

    • vSpace Pro Installation - Tips, References and Process Detail

      Introduction This article provides a comprehensive guide to installing the vSpace Pro platform, including both the Enterprise Edition and the Long-Term Support (LTS) Edition. It also outlines critical pre-deployment recommendations, platform ...

    • NComputing Deployment Checklist for L, M, MX, RX Series thin clients and Client Pro

      Summary This document is intended to provide a detailed overview of the three main stages of a deployment with vSpace: We will cover in this document the following: 1. Pre-deployment 2. Host Deployment and Tuning Below you'll find a consolidated list ...

    • How to install vSpace Pro Enterprise in restricted network environment (e.g. offline deployment)?

      To deploy vSpace Pro in restricted Internet network environment (e.g. offline environment), it is mandatory to have a minimum of 2 host machines. One host machine (Host A) is used to deploy the vSpace Manager component. A second host machine (Host B) ...

    • Legacy L-series User Manual

      "Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...

    • Update L Series Firmware in vSpace Pro

      Update via vSpace console Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet.  Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass ...