VERDEOS NAS Mount Instructions

VERDEOS NAS Mount Instructions:

Product Line: VERDE

It is recommended that you set up your shared storage mount before installing and using VERDEOS.  But, it is possible to add the storage device post usage.  You'll need to backup all the data located in /home/.  /HOME/vb-verde is the mount point for VERDE..  Once mount is successful, move all your data back to /home/vb-verde on the storage device.

First and foremost, have your storage device formatted and named.  Mine is: "/vol/vol0/data/support/cluster/122"

If this is a new install and VERDEOS has been used:

Exit the menu and run:
yum -y install nfs-utils nfs-utils-lib

  • Access the verde-menu (/usr/lib/verde/bin/verde-menu)
  • Select option 2 (Server Configuration)
  • Select option 3 (Configure External Storage)
  • Select the appropriate storage type (1 CIFS, 2 NFS)
  • You need to provide the storage server's IP
  • The storage type (NFS3, NFS4)
  • The mount point (/vol/vol0/data/support/cluster/122)
When displayed, it should resemble the following:



Restart your server and check your storage (df -h)

    • Related Articles

    • VERDE/VERDEOS CIFS Mount Instructions

      Product Line:  VERDE To get CIFS storage working with RPM based installation on CentOS 7.x, use the following steps:   Install CentOS 7.x Install VERDE using RPM build packages Installed CIFS-UTILS using command yum install cifs-utils Stop VERDE ...

    • When Testing Network, it Fails on CIFS Mount

      Product Line:   VERDE If you're attempting to mount CIFS/Windows storage device for VERDE's clustered environment, you MUST get “a route” established between the Cluster Master and the CIFS storage server before the mount is successful.  What you ...

    • Configuring CIFS for VERDEOS

      Product Line:  VERDE Following are instructions to assist in setting up Common Internet File System (CIFS) to be used as Shared Storage by VERDEOS. ·         Create a CIFS share on the Windows Server and make sure it is accessible from another host ...

    • Modifying VERDEOS Server IP Address As of 8.2.7/16500

      Product Line:  VERDE The following instructions will walk you through changing the IP Address of your VERDEOS server.  Ensure all images are shutdown.  From the server (not putty/ssh): ·         Access the VERDE-menu (/usr/lib/verde/bin/verde-menu) ...

    • VERDE NFS 3 as Opposed to NFS4 As of 8.2.7 and Before

      Product Line:  VERDE As of the writing of the Knowledge Base Article, NFS4 has not been tested.  A customer installed their Clustered VERDEOS 8.2.7 on NAS/NFS 4.  VERDEOS installed, but, when they attempted to create a gold image or access an ...