Updating your NSeries Devices with FTP
This article is for customers looking to use FTP to change their firmware versions on NComputing devices.
See the attached PDF for the steps to use FTP to upgrade or even downgrade N Series device firmware as needed.
Also, another highly recommended article for L and M
series devices and firmware updates, click here.
Update L300 Firmware (Classic vSpace 6)
"Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020. Please upgrade promptly to our latest platform vSpace Pro. If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...
How can I update firmware for RX-RDP, RX-RDP+, RX420(RDP) and LEAF OS devices?
Please refer to RX-RDP, RX-RDP+, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Support section of Setup GUI contains ...
How can I update the RX300 firmware?
Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Support section of Setup GUI contains firmware update ...
Update L Series Firmware in vSpace Pro
Update via vSpace console Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet. Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass ...
Firmware update availability for N-series devices
N-series devices (N400, N500, N500w, N600) will reach End-of-Life on the following schedule: N400: December 30, 2019. N500: December 31, 2020 N500w: December 31, 2020 N600: December 31, 2020 Firmware for these devices are no longer in development. ...