RX-HDX Audio settings
USB \ Analog Audio with firmware versions 2.40.3512 and newer.
RX-HDX default setting optimizes the USB audio quality and
performance. This may have a negative effect on analog audio. The following audio setting applies to RX-HDX firmware versions 2.40.3512 or newer.
If
analog audio (headset/speaker) or HDMI audio (built-in monitor speaker) is to be used, please follow below procedures to
enhance the analog audio/HDMI audio quality and then reboot the device..
Configuration change to enhance analog (or HDMI) audio quality:
- Go
to RX- HDX configuration setting -> Audio -> PulseAudio -> “Timer-based scheduling (tsched)”
- Change the parameter from ‘no setting’ to ‘off’.
- Click
on ‘save’ and then reboot the device.
Note: This configuration change will enhance the analog audio quality but degrade the US audio quality.
Configuration change to enhance USB audio quality:
To switch back to the default
setting with optimized USB audio quality:
- Go to RX-HDX configuration setting -> Audio ->
PulseAudio - > Timer-based scheduling (tsched)
- Change the parameter from
‘off’ to ‘no setting’.
- Click on ‘save’ and then reboot the device.
Note: This configuration change will enhance the analog audio quality but degrade the US audio quality.
If there are multiple audio output devices connected to RX-HDX, please select the prefer ‘standard audio device’ (e.g. analog, HDMI or USB) shown in the screenshot below. Then configure the corresponding audio setting as described above to ensure best possible audio playback performance.
Related Articles
Question: I used HD webcam in Skype for Business in Citrix session and experienced some audio quality distortion on RX-HDX, what can I do to tune my audio quality?
If you use Skype for Business with RTME in Citrix session, and experience some audio quality distortion while HD webcam is used, we recommend using the following configuration to fine tune the audio quality: • Login to RX-HDX device as an ...Citrix HDX RealTime Media Engine on RX-HDX - Skype for Business
•The Citrix HDX RealTime Media Engine (RTME) is the client-side component of the Citrix HDX RealTime Optimization Pack for Skype for Business RX-HDX FW 2.40.2658 includes Citrix Receiver 13.8 and RTME version 2.4.0-1233 RTME component Single Display ...How to update Linux kernel in SDA for RX-HDX
Background In some earlier versions of the SDA for RX-HDX, the device comes with an older version of the Linux kernel (4.9.35+). In some rare occasions this Linux kernel version may result in occasional freezing of the device. We recommend customers ...Configuration and settings for Dual Display with RX-HDX
Here is a link to the Wiki page for configuring Dual Display with NComputing and SDA The below is additional reference information Configuring the RX-HDX to support the Secondary Display adapter is relatively simple. Below are the necessary steps. ...VERDE/VERDEOS Skype Audio Calling Configuration Instructions via RX-300
Product Line: VERDE On Peripherals tab, modify PERIPHERAL DEVICES REDIRECTION SETTINGS TO Custom. Add Custom VID:PID by clicking on + icon Set Redirection type for Audio class devices to Native (UXP & RDP) Make sure, USB is setup to top on AUDIO ...