MX100D Setup Utility

MX100D Setup Utility

MX100D Setup Utility

The attached utility is for customers who have installed the MX100D PCIE card and cannot connect their end user devices to the host server.

Please run the attached utility after you have run appropriate vSpace software compatible with the MX100D.

You should be able to connect your devices right away.

For further information on this process, please go here.

    • Related Articles

    • Smart Card Reader Support in vSpace Pro

      Enhanced Smart Card Reader Support: Extended smart card support for RX300 and vSpace Pro Client for Windows is now an included feature starting with vSpace Pro version starting in 11.2.0 and higher versions. If your organization requires smart cards ...

    • MX100D: Cannot Connect to Host

      This article is for users looking to install the NComputing MX100D PCIE card solution. The provided link below is also available inside the original installation disk from the MX100D packaging. This is an additional step to the software installation ...

    • NComputing Deployment Checklist for L, M, MX, RX Series thin clients and Client Pro

      Summary This document is intended to provide a detailed overview of the three main stages of a deployment with vSpace: We will cover in this document the following: 1. Pre-deployment 2. Host Deployment and Tuning Below you'll find a consolidated list ...

    • L Series. Error: IP Conflict Detected

      If you are using terminals that are not compatible with vSpace Pro 11 or Enterprise edition, likely, these are outdated and need to be upgraded.   You can see our new line of products and consult your sales representative or authorized partner about ...

    • L300 Quick Setup Guide for Windows Server 2008 R2 and vSpace 6 Server Software

      The goal of this guide is to provide a quick, easy reference guide to getting the L300 and VSpace software configured quickly and successfully. Prepping the host operating system Ensure that you begin with a supported operating system. You can view a ...