Quick Setup Guide

L300 Quick Setup Guide for Windows Server 2008 R2 and vSpace 6 Server Software

The goal of this guide is to provide a quick, easy reference guide to getting the L300 and VSpace software configured quickly and successfully.

Prepping the host operating system

  • Ensure that you begin with a supported operating system. You can view a current list of supported operating systems here.
  • Use a fresh installation of Windows for your vSpace deployment.
  • Install all drivers and windows updates. For questions about supported Windows updates and service packs you may contact NComputing support at: http://www.ncomputing.com/techsupport
  • If your host is running in a virtual machine, please follow our VM tuning guide: VM Tuning Guide
  • Back up your operating system or create a snapshot if using a virtual machine.

Download vSpace

Install vSpace

  • Extract the contents of the downloaded vSpace .zip file.
  • Run vSpace_LSeries_6.x.x.x.msi
  • Click through the installation wizard.
Note: During installation you are given the option to set the password for your vSpace software.

Update L300 Firmware

  1. Please use this article: https://support.ncomputing.com/portal/kb/articles/performing-a-firmware-update-on-an-active-l-series-device-article-317-work-in-progress

 Register vSpace


    Bear in mind that registration is only allowed through June 30, 2020 and after that registration will not be possible. 


Note:  This is a good point to create another back up image or snapshot of your operating system for expedient testing and added convenience during deployment.
 
When you first install Windows Server 2008 R2, Microsoft starts the clock on a 120-day grace period before the OS needs to have access to an activated RDS licensing server. This Knowledge Base document will guide you through the necessary steps to create, activate, and use the RDS licensing server with vSpace 6 for Windows.



Note: Windows Server 2008 R2 RDS CALs can only be installed on and issued from a Windows Server 2008 or Windows Server 2008 R2 Licensing server.


On your L300 select the “Refresh” button, when your server appears, select it and click “Connect”. You are now ready to begin testing your L300, applications, and security software. It is recommended to test in a manner that is as close as possible to your intended deployment.


Article #KB044

Last Edited: May 20, 2020

    • Related Articles

    • Port Configuration for NComputing vSpace Products

      Use of this document This document will assist you with your port configuration for your environment's network, antivirus, firewall, and security software.  When not configured, some of the mentioned, can sometimes interfere with the initial ...
    • Network Error Code 10014 / Network Error Code 10054

      Network Error Code 10014 and 10054 occur in XP and 2003 Server when running the vSpace Registration utility, and attempting to perform an online registration, the following errors may occur.  Therefore, the registration process cannot complete ...
    • Update L300 Firmware (Classic vSpace 6)

      "Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...
    • Offline Registration Process for Legacy vSpace Software Versions

      With the end of life of several of our vSpace Server editions, the online registration services have been decommissioned as follows: Apr 30, 2018 --vSpace 4.x, 7.x and 8.x Apr 30, 2018 --vSpace 6.x for L-series thin clients These dates, as well as ...
    • Update L Series Firmware in vSpace Pro

      Update via vSpace console Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet.  Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass ...