L300 How to adjust the resolution of the session

L300 How to adjust the resolution of the session

Here is how to configure resolution settings:

Through vSpace Pro 10: Launch the vSpace Console, then, click on Manage Devices.  Make sure that the All devices tab is selected.  Select and click on your device from the table.  Click on Device Settings.  Select the Login tab.  There you can configure the desired settings and click Apply.    

Through the local device firmware. In the connection screen menu, click on Device Setup and go to the Login Settings tab.  There you can configure desired settings and click Save.   

If the resolution change does not take place, likely the session to which the terminal was connecting to is still open at the server.  Ensure that the terminal has no currently open sessions.  You can even restart the server and do not login anyone until you have change resolutions as desired.
   

    • Related Articles

    • How to use 'Scheduled Tasks' feature in vSpace Console for scheduled reboot, shutdown or firmware update

      vSpace Pro Enterprise Edition (version 12.5.1 and higher) comes with vSpace Console ‘Task Schedule’ support for scheduled device reboot, shutdown and firmware update. Below please find the instructions for each supported ‘Task Schedule’ use case: (1) ...

    • Update L300 Firmware (Classic vSpace 6)

      "Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...

    • Update L Series Firmware in vSpace Pro

      Update via vSpace console Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet.  Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass ...

    • Can I use vSpace Console to centrally manage my RX300 devices?

      vSpace Console is the central management interface for the vSpace Pro environment. vSpace Console is where admins can centrally manage vSpace deployment with device management features. • Define device configuration profiles and push to hundreds of ...

    • vSpace Console application may crash

      When using vSpace console in vSpace version 10.3.4.2, if using the option to scan remote LAN's for devices.  If the devices on the remote network are 1.11.x or other versions from vSpace 6 \ 7 \ 8, this may cause the console application to fail. if ...