L Series: Disable USB keyboard and mouse

L Series: Disable USB keyboard and mouse

  
In some cases, L300 devices are used in a kiosk or display only mode where local human interaction is not desired. This can be achieved by disabling USB keyboard and mouse drivers on L300 device through the steps below:

• Open Device Manager in the host
• Under "View" menu, click "Show hidden devices"
• Under "Non-plug and Play Drivers", disable both Multiuser Legacy Keyboard Port Driver and Multiuser USB Mouse Class Driver
• Reboot the host as required.
• Keyboard and mouse on L300 can be enabled by enabling these two drivers if needed.



Article ID: 178
    • Related Articles

    • L Series: L-230, L-130 and Legacy Devices. About USB Device Support

      If you are using terminals that are not compatible with vSpace Pro 11 or Enterprise edition, likely, these are outdated and need to be upgraded.   You can see our new line of products and consult your sales representative or authorized partner about ...
    • Keyboard

      Keyboard Configuration The keyboard is the primary input facility of a personal computer system. In NoTouch, you have several ways to configure the keyboard. Most people will be fine with just setting the keyboard layout (English, French, German, ...
    • L300: Mouse or input device is behaving erratically.

      If an input device you use with your L Series device shows erratic patterns, seems to work intermittently, or doesn't work at all, there are a few tips that may help. 1. Sometimes, USB devices coming from different vendors, may use components that ...
    • USB third party devices

      Scope  This Article is for users looking for 3rd party, USB device compatibility for current L-Series, MX Series and M-Series NComputing devices. General advice Update the vSpace platform.   The general rule when you are using a third party device ...
    • What are the default USB peripherals settings in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?

      Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Peripherals section of the RX-RDP Setup GUI allows ...