Topaz signature pad vspace

How to use signature pads in vSpace Pro 11 LTS

This enhancement is available for vSpace Pro 11.2.0 or newer version.

The following configuration setting to support signature pads are only applicable to RX300.

On RX300 thin client, generic USB redirection policy must be applied to the connected signature pad for the peripheral to be recognized by vSpace.

Please refer to the instructions below to configure:

1.       From RX300 setting menu -> select ‘Peripherals’ tab -> choose the “Custom” option for peripheral devices redirection settings.



2.       On the same page, click on the + icon under ‘Custom VID: PID’ section to invoke the customized peripheral redirection UI.
3.       Enter the corresponding VID and PID values from the list of pre-configured USB signature pads below:


Following is a list of USB signature pad models which have been pre-configured in vSpace Pro 11 server (version 11.2.0 or newer) with proper server-side isolation (i.e. user A will not see the signature pad connected to user B).

·         VID PID 056A:00A1 Model: WACOM STU-500

·         VID PID 056A:00A2 Model: WACOM STU-300

·         VID PID 056A:00A3 Model: WACOM STU-520A

·         VID PID 056A:00A4 Model: WACOM STU-430

·         VID PID 056A:00A5 Model: WACOM LCD Signature Pad STU-530

·         VID PID 056A:00A6 Model: WACOM STU-430V

·         VID PID 056A:00A7 Model: WACOM LCD Signature Pad STU-530V

·         VID PID 056A:00A8 Model: WACOM LCD Signature Pad STU-540

·         VID PID 056A:00A9 Model: WACOM LCD Signature Pad STU-541

·         VID PID 0403:6001 Model: Topaz Signature Gem T-LBK462-BSB-R

·         VID PID 06a8:0043 Model: Topaz Signature Gem T-L462-HSB-R

 

Note: NComputing cannot guarantee the listed signature pads above would operate properly in the vSpace environment and should be tested by the customer before deployment.


    • Related Articles

    • Printer Management in vSpace Pro version 11 LTS

      The new Printer Management feature introduced in vSpace Pro version 11 LTS allows the following: ·         Configuring the right user access control lists on the redirected NComputing thin-client printer objects to make sure that only the user ...
    • How to: Register vSpace Pro LTS Offline

      This Article is for administrators who are looking to register their vSpace Pro LTS (version 11.3.10) installation. ATTENTION: Do not perform Offline Registration if you have Aged Devices (Manufactured Prior to January 1, 2015) as these devices are ...
    • How to use the “Arduino Board” and “BBC micro:bit” in vSpace Pro LTS and Enterprise Editions?

      Arduino is an open-source electronics platform based on easy-to-use hardware and software and is commonly used by education experts, content developers, engineers and interaction designers from all around the world. Arduino boards are able to read ...
    • What are key benefits of using vSpace Pro 11 LTS

      vSpace Pro 11 LTS supports 10 popular Windows™ operating systems, including Windows Server 2016 and Windows 10. If you use Windows, you’ll be right at home. Your users will all have the same familiar Windows desktop experience. Access the Windows ...
    • Smart Card Reader Support in vSpace Pro

      Enhanced Smart Card Reader Support: Extended smart card support for RX300 and vSpace Pro Client for Windows is now an included feature starting with vSpace Pro version starting in 11.2.0 and higher versions. If your organization requires smart cards ...