How to configure DNS setting on RX-RDP and RX300?
By default the
addresses of DNS servers and the DNS domain name search suffix will be obtained
automatically from a DHCP server. The DNS parameters can also be specified
manually:
·
DNS configuration – DHCP
or Static. With DHCP is the DNS parameters will be obtained automatically. Static allows manual specification of
the parameters.
·
DNS Server 1 – the IP address of first DNS server.
·
DNS Server 2 – the IP address of second (optional) DNS server.
·
Domain name – the DNS domain name search suffix.
Note: The DNS configuration can only be obtained from a DHCP server when at
least one network interface (Ethernet or WiFi) is configured to obtain its
parameters from a DHCP server too. When both network interfaces use static
(manual) configuration also the DNS
configuration must be set to Static
and the DNS parameters must be specified manually.
Related Articles
How to configure DNS setting on RX-RDP and RX300?
Please refer to RX300 & RX-RDP user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide By default the addresses of DNS servers and the DNS domain name search suffix ...
[Release Notes] RX-RDP+, RX420(RDP) and RX440(RDP)
LATEST RX420(RDP), RX440(RDP) AND RX-RDP+ FIRMWARE VERSION 6.7.507 TECH PREVIEW RELEASE NOTES 6.7.507 is a Tech Preview release for RX420(RDP), RX440(RDP) and RX-RDP+, which replaces the 5.12.8 (official release) and earlier versions with new ...
How to configure Ethernet setting in RX-RDP and RX300?
Please refer to RX300 & RX-RDP user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide By default the Ethernet interface is enabled and configured to obtain the IP ...
[General Guide] RX-RDP+, RX420(RDP), and RX440(RDP) thin clients
RX420(RDP)|RX440(RDP)|RX-RDP+ Thin Clients Designed and optimized for Microsoft (AVD, Windows 365, RDS), and NComputing (vSpace Pro and VERDE) ABOUT THE PRODUCT The RX420(RDP) and RX440(RDP) cloud-ready thin clients are built on the Raspberry Pi 4B ...
RX300 / RX-RDP USB Peripheral device redirection recommendations.
Please refer the KB article on How to configure USB peripheral device redirection policy for RX300 and RX-RDP: https://support.ncomputing.com/portal/kb/articles/how-to-configure-usb-peripheral-device-redirection-policy-for-rx300-and-rx-rdp In ...