How to configure Display Properties on an RX300 and RXRDP devices.
You can change the Network connection settings of an RX unit by first going to the firmware of the device and click on the gear icon on the top right of the home screen.
From there, go to the Display Tab and you will be able to configure any desired resolution if it is available in the menu.
You will also be able to configure Screen Saver and Desktop Wallpaper.
Article #KB843
Last Edited: July 16, 2020
Related Articles
Enabling Dual Monitor Display on RX300 (VGA and DVI versions)
How to enable the Dual Display on the RX300 PDF available here as well PRE INSTALLATION REQUIREMENTS 1. You will need an NComputing Secondary Display Adapter Kit (SDA) There are different versions of these adapters and you will need to ensure that ...
How to Change the Management Console Language
Product Line: VERDE From time to time, we get requests to change the Management Console's language. For example, from German to English. By default, the language is set by the user's browser language. There is a workaround: The attached script ...
Configuration and settings for Dual Display with RX-HDX
Here is a link to the Wiki page for configuring Dual Display with NComputing and SDA The below is additional reference information Configuring the RX-HDX to support the Secondary Display adapter is relatively simple. Below are the necessary steps. ...
[Release Notes] RX-RDP+, RX420(RDP) and RX440(RDP)
LATEST RX420(RDP), RX440(RDP) AND RX-RDP+ FIRMWARE VERSION 5.12.8 RELEASE NOTES 5.12.8 is an official release for RX420(RDP), RX440(RDP) and RX-RDP+, which replaces the 5.12.4 (previous official release) and earlier versions with new enhancements and ...
How to get started with the SDA-RX300 (HDMI) for RX300 and RX-RDP devices.
PRE INSTALLATION REQUIREMENTS 1. You will need an NComputing Secondary Display Adapter Kit (SDA) There are different versions of these adapters and you will need to ensure that you have the right one to fit your needs. This article covers the HDMI ...