How are touch screens supported in RX-RDP, RX420(RDP) and RX300?

How are touch screens supported in RX-RDP, RX420(RDP) and RX300?

Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide

Although the touchscreen displays (which also includes multitouch screens and interactive whiteboards/smartboards) are usually Human Interface Devices (HID devices) there is no general Native selection for the whole Human Interface Devices class.


This is because HID is a very wide class and developing an universal native redirection method covering all HID devices is technically impossible. For that reason a dedicated check-box has been added for controlling the native redirection of the (multi)touch screen monitors. This check-box must be selected to enable native redirection of touchscreens. This method works with both supported protocols: UXP (vSpace Client mode, VERDE VDI Client mode) and RDP (RDP Client mode, VERDE VDI Client mode).



    • Related Articles

    • How are touch screens supported in RX-RDP, RX420(RDP) and RX300?

      Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide Although the touchscreen displays (which also includes ...

    • RX-RDP+, RX420(RDP), and RX440(RDP) thin clients overview

      The RX420(RDP) and RX440(RDP) cloud-ready thin clients are built on the Raspberry Pi 4B platform with integrated 2GB and 4GB system RAM, respectively. They bring premium performance and native dual display support, providing a rich PC-like experience ...

    • What custom RDP parameters does the RX-RDP support?

      Custom RDP parameter options are supported when an RX-RDP device is operating in RDP client mode. The 'Custom parameters' option can be used to specify additional parameters (command-line options) for the FreeRDP client used by the device for ...

    • What are the default USB peripherals settings in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?

      Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Peripherals section of the RX-RDP Setup GUI allows ...

    • [Release Notes] RX-RDP+, RX420(RDP) and RX440(RDP)

      LATEST RX420(RDP), RX440(RDP) AND RX-RDP+ FIRMWARE VERSION 5.12.8 RELEASE NOTES 5.12.8 is an official release for RX420(RDP), RX440(RDP) and RX-RDP+, which replaces the 5.12.4 (previous official release) and earlier versions with new enhancements and ...