How are smart card readers supported in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?
The RX-series firmware and LEAF OS contain the PC/SC daemon and a set of smart
card reader drivers which allow the native (functional) redirection.
CCID-compliant smart card readers and numerous ACS (Advanced Card Systems,
Ltd.) smart card readers are supported with native redirection. Any number of
thin clients can start the terminal sessions with native smart card reader
redirection enabled. Please refer to RX300 or RX-RDP firmware Release Notes for a full list of supported smart card reader models.
The Native (UXP and RDP)
redirection type must be selected for the Smart
card readers device class in Peripheral
devices redirection settings group in the Peripherals section of Setup GUI to enable the native redirection
of smart card readers for RDP sessions (in RDP Client and
VERDE VDI Client operation modes).
The ‘certutil -scinfo’ command can be used inside the RDP session to verify
the operability of the redirected smart card reader and the smart card inserted
into the reader. With well working redirection it will ask for card’s PIN and
display the certificate stored on the card.
Related Articles
How are smart card readers supported in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?
Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide Native USB redirection of smart card readers The RX-series ...
What are the default USB peripherals settings in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?
Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Peripherals section of the RX-RDP Setup GUI allows ...
What are the default USB peripherals settings in RX-RDP, RX420(RDP), RX300 and LEAF OS devices?
Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Peripherals section of the RX-RDP Setup GUI allows ...
[General Guide] RX-RDP+, RX420(RDP), and RX440(RDP) thin clients
RX420(RDP)|RX440(RDP)|RX-RDP+ Thin Clients Designed and optimized for Microsoft (AVD, Windows 365, RDS), and NComputing (vSpace Pro and VERDE) ABOUT THE PRODUCT The RX420(RDP) and RX440(RDP) cloud-ready thin clients are built on the Raspberry Pi 4B ...
Smart Card Reader Support in vSpace Pro
Scope / Overview This article provides details on the enhanced smart card reader support available in vSpace Pro version 11.2.0 and later. It covers supported devices, setup instructions, and configuration settings for optimal performance. ...