Firmware update availability for N-series devices

Firmware update availability for N-series devices

N-series devices (N400, N500, N500w, N600) will reach End-of-Life on the following schedule:

N400: December 30, 2019. 
N500: December 31, 2020
N500w: December 31, 2020
N600: December 31, 2020

Firmware for these devices are no longer in development. The final firmware version is 3.2.0.1 is available for download on our website.

    • Related Articles

    • Update L300 Firmware (Classic vSpace 6)

      "Classic Versions" like vSpace 6 will be permanently discontinued after June 30th, 2020.   Please upgrade promptly to our latest platform  vSpace Pro.  If you are using version 6 because of terminals that are not compatible with vSpace Pro 11 or ...

    • Update L Series Firmware in vSpace Pro

      Update via vSpace console Make sure your L300 devices and at least one vSpace host are on the same ethernet subnet.  Out of LAN updates could only be possible if proper configurations to the network have happen to accommodate UDP protocols to pass ...

    • How can I update the RX300 firmware?

      Please refer to RX-RDP, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details: https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Support section of Setup GUI contains firmware update ...

    • How can I update firmware for RX-RDP, RX-RDP+, RX420(RDP) and LEAF OS devices?

      Please refer to RX-RDP, RX-RDP+, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Support section of Setup GUI contains ...

    • How to use 'Scheduled Tasks' feature in vSpace Console for scheduled reboot, shutdown or firmware update

      vSpace Pro Enterprise Edition (version 12.5.1 and higher) comes with vSpace Console ‘Task Schedule’ support for scheduled device reboot, shutdown and firmware update. Below please find the instructions for each supported ‘Task Schedule’ use case: (1) ...