Factory Reset RX-HDX device using Remote Browser Login

Factory Reset RX-HDX device using Remote Browser Login

Factory Reset RX-HDX device using Remote Browser Login

If you are unable to access the local configuration (e.g. because the screen stays blank or device fails to boot up) but the device has network then you can follow below mentioned steps to factory reset your device:

From another host in the same network launch web browser and access the Device IP and log in using credentials configured on device. A front end similar to the local configuration application will be displayed.

After successful login, please click on the menu item "Factory defaults":



Confirm the action i.e. Yes/No to proceed with factory reset, This is to protect you from an unwanted factory reset.

This would reset your device to factory default settings.




    • Related Articles

    • RX-HDX Factory Reset

      This article is for administrators needing to reset an RX-HDX device with a manual process because it has somehow locked or stopped responding to the management tools. Introduction to Factory Rest (FW 2.40.2144+) Important - Do not use a KVM or ...

    • initramfs - RX-HDX Image Recovery

      Method to recover from RX-HDX image corruption Revision date: February 27, 2019 Scope In some rare cases, certain RX-HDX software component(s) may become corrupted and resulted in the device not being able to boot up properly. The customer should try ...

    • Upload Certificate directly to RX-HDX device using Web GUI

      Upload Certificate directly to RX-HDX device using Web GUI Certificates can be directly uploaded to the device, without using NoTouch Center. To do that follow the below mentioned steps: Go to device’s web interface i.e. Access device’s IP address in ...

    • RX300 Factory Reset

      1. Process under newer firmware builds. (3.10.3 and newer) In recent versions of the RX300 firmware you can find the Factory Settings button in the RX300 firmware menu: A. Click on the settings (gear) icon. B. Click on the Support tab  C. Click on ...

    • How to update Linux kernel in SDA for RX-HDX

      Background In some earlier versions of the SDA for RX-HDX, the device comes with an older version of the Linux kernel (4.9.35+). In some rare occasions this Linux kernel version may result in occasional freezing of the device. We recommend customers ...