Configuring RX-300 for VERDE

Configuring RX-300 for VERDE

Product Line:  VERDE

RX300

For those of using the RX300 we have a new firmware drop, please update the firmware on your RX300.




 



Current:

 

RX-RDP


 

Update firmware:

Go to RX300 UI, go to Setting -> Support and select firmware update using Web URL. 

Type in the following URL and click okay to proceed the firmware update process:


http://www.zeropc.com/rx300/rx300-3.2.25.upd 


After the update, it will automatically reboot RX300 to complete the update process.

 

To configure VERDE:

Go to RX300 UI, go to Setting -> General tab, select VERDE VDI mode. Click apply to save.

Then go to Setting -> Connection tab. Fill out the VERDE connection broker IP address. Click apply to save.

 

Then you will see the VERDE login UI with user name and password. Once you enter, the UI will then display your VERDE desktop resources available to this user, select the desktop resource and the protocol (UXP or RDP) you wish to connect.

 

 


 


    • Related Articles

    • Using VNC with RX-300 and RX-RDP

      Product Line:  VERDE There is a known limitation with VNC: The ‘/novcast’ custom parameter for the RDP connection allows the customer to VNC-shadow the RDP session, but it disables the vCAST technology, which is the main feature of the SuperRDP ...

    • How can I update firmware for RX-RDP, RX-RDP+, RX420(RDP) and LEAF OS devices?

      Please refer to RX-RDP, RX-RDP+, RX420(RDP), RX300 and LEAF OS user configuration guide for additional details:  https://support.ncomputing.com/portal/kb/articles/rx300-rx-rdp-user-configuration-guide The Support section of Setup GUI contains ...

    • Accessing the RX-300 and RX-RDP Linux Line Command to Collect the Client Logs

      Product Line:  VERDE On the RX300 device please do the following to collect the logs:   Please open the Setup GUI, go to Peripherals section, select Custom settings and select ‘Native (RDP only)’ redirection for mass storage. Apply the settings. With ...

    • RX-RDP with VNC Can Have Issues. Please Refer this Article

      Product Line:  VERDE A customer had the following issue: Using VNC, they accessed their RX-RDP client Once again, via VNC, they logged into the VERDE environment Selected their Win10 image The Image comes up, but the screen is black. Solution:   The ...

    • How do I redeem an AMP for RX-RDP, RX-RDP+ and RX420(RDP) License key?

      If you purchase RX-RDP, RX-RDP+ and RX420(RDP) AMP license, you’ll receive a corresponding license key. To redeem a license key, Go to www.ncomputing.com and login using the using the account that you used when you registered your RX-RDP, RX-RDP+ and ...