Configuring N-Series devices with custom DHCP scope options
NComputing recommends using the most current version of vSpace Management Center for N-Series device management, however, there may be a need to configure some settings on an N-Series device via DHCP scope options. Specifically the Tag (171) for assigning an N-Series device to the appropriate vSpace Management Center.
The attached guide provides a list of scope options, including the data types required, recommend descriptions and a short introduction into creating custom DHCP scope options.
Migrating vSpace Management Center 3.6 or 3.7 to later versions of vSpace Management Center
When a update to vSpace Management Center is released it is important to update. Updates contain feature additions, security enhancements and updates as well as bug fixes. The process is simple, see below: Create and save a backup of your current ...
VMC Search results are Truncated (RESOLVED)
Using VMC 184.108.40.2066 witn N-Series 220.127.116.11. When performing a device search for devices such as Retail the search results may not display all devices that meet the search criteria This problem has been addressed in VMC 3.7.20 Please follow the steps ...
How do I get support for my N-Series device?
The N-Series product family includes the 400, 500, 500W, and 600. The N-Series 400 has reached its “End of Support” date and is therefore limited to self-help via our KB articles in this portal. The 500, 500W, and 600 will reach end of support ...
Best Practice: How to join N-Series devices to vSpace Management Center
This brief guide applies to vSpace Management Center 3.6 and later versions. vSpace Management Center 3.3.1 for Window is no longer supported and it is highly recommend that you migrate to the most current version vSpace Management Center Appliance. ...
Automatic PMC server discovery (management server)
Automatic registration of RX-RDP devices with the PMC management server can be obtained by adding a DHCP scope tag of 207 If you add DHCP scope tag 207 equivalent to your PMC server hostname or IP address you RX-RDP devices will automatically ...