Additional Information From the Engineers About Using GPU

Additional Information From the Engineers About Using GPU

Product Line:  VERDE

Here's a bit more information from QA and the Engineers regarding GPU:

From QA:

The GPU model that we have is NVIDIA Tesla M60


Please see below article with steps to configure GPU with VERDE Server:

From the Engineer:

The gpu model that we have is this one: NVIDIA Corporation GK107GL [GRID K1] (rev a1)


To configure it you need to run /usr/lib/verde/bin/verde-config -m and in menu enable GPU passthrough by providing video card vendor-device IDs (example: [vendor-ID:device-ID]) and in Management Console assign GPU to specific Golden Image

    • Related Articles

    • Additional Explanation Regarding vGPU vs. GPU

      Product Line:  VERDE There are two main types of GPU cards: Those that support virtual GPU and those that do not. For the virtual GPU cards - the ones that we have tested with VERDE: There is a single physical GPU card that is plugged in to the ...
    • How to Set up "TRUE" Virtual GPU in VERDE

      Product Line:  VERDE This document is designed to assist the engineer in installing "TRUE" vGPU in VERDE.   It needs to be said, this requires a very high-end vGPU card.  For example:  Nvidia The high-end card allows VERDE configuration scenarios ...
    • Configuration Tips for GPU/vGPU

      Product Line:  VERDE QA had some issues testing GPU. They got one session to work but they had issues getting multiple concurrent sessions working. We think it's because they have things configured incorrectly. The Engineering QA had no such problem. ...
    • VERDE 8.2.8 + - VERDE VDI GPU Setup and Configuration

      Product Line:  VERDE With the release of VERDE 8.2.8, support for most modern GPU Cards becomes available. This article describes the setup and configuration required for a guest session hosted by VERDE VDI to leverage the capabilities of the GPU ...
    • Discussion Regarding AutoCad with GPU. Specifically Sizing

      Produce Line:  VERDE Following is a discussion regarding how to size (RAM, Storage) when using AutoCad and VERDE's GPU. So It is very important that adequate testing of AutoCad is performed in Verde to ensure that the correct amount of RAM and ...